Give your home a refreshed look and feel with a refinish.Learn More
Hardwood flooring creates a warm, welcoming environment for your home.Learn More
Some floors just need a recoating to revitalize their beauty.Learn More
We can make the new flooring blend in and leave a flawless, uniform finish.Learn More
Hardwood flooring has been the most universally desirable choice for floors almost as long as floors have been a thing. The variety of tones, textures and levels of hardness combined with the wide availability of lumber in North America have made hardwood flooring a choice many homebuyers and builders don’t even need to think about when selecting a floor.
In addition to its objective qualities, hardwood flooring can elicit a range of emotions as well. An enchanting white oak makes you feel open and calm about your living space. A luxurious black walnut gives you a feeling of refinement and elegance that few other floors can match. Or maybe you want the warmth and coziness that a caramel bamboo provides.
Many homebuyers factor these feelings the house gives them into their decision to purchase or not. While you may be able to explain in vivid detail how the flooring makes you feel, the type of wood that actually makes up your distinguished living room, or your airy kitchen may not be as easy to explain.
Unlike roofing, counter tops or architectural and design elements, you can’t really tell what kind of wood you have just by looking at it. At least not without a few caveats.
First and foremost, you must have a sample of the wood that allows you to see the end of the planks. Without such a sample, it’s going to be very difficult and impossible even to identify the type of wood you have.
The end of the plank is the unfished area that is made visible when a plank is cut laterally.
Because the visible portion of the wood floor on top of the planks can be finished and stained in a variety of ways, the real wood is going to be what you see on the end of the planks. If you can spot visible end-grain along this edge (that is natural-looking wood grain composed of rings and consistent running wood lines).
End-grain visible on Black Locust Wood Species
Particle or composite board
You can see in the images above that the bottom image looks very familiar to anybody who has ever put together a piece of Ikea or Sauder furniture. It’s that messy, sawdusty wood that feels like it could fall apart if not held together by the thin veneers. It’s not a terrible choice for wood flooring, but it is not solid wood.
If the wood appears real, it may still have a veneer on it. The best way to identify veneers is to keep an eye out for repeated patterns in the wood.
Next is figuring out the color of the wood and the grain. If your wood sample and flooring was stained, you may have to plane the sample in order to see the color of the grain. Likewise, if the wood has a patina on it (or natural discoloration that takes place as a wood surface ages), you will need to sand the sample down and see the way the wood appears.
Because a number of different woods may have similar colors, discovering the color of the wood will not provide an immediate answer, but it will help you narrow it down. Certain wood colors like black or red are an exception, being almost immediately indicative of uniquely colored solid wood varieties (ebony and padauk respectively – though you’d probably know if you had one of these floors as it would have added a couple of ten thousands to the price of your home).
So color alone is not likely to help us identify wood. The other key factor is looking at the grain on the wood’s surface. Just like the supposedly vain pursuit of trying to figure out the secret to the stock market, we’re looking for patterns here (we’ll get it someday)!
Oak is one of the most common hardwood flooring materials. It’s durable, sufficiently hard and widely available. Oak is almost instant recognizable for it’s open and porous grain texture. This large open grain texture has made oak a preferred choice for unfinished rustic appearances.
If the wood grain is smooth and lacks the rough texture, it’s probably a softer wood. Certain varieties of wood like lacewood or sycamore will be almost instantly recognizable by their grain.
Depending on the wood species and lumber producer, wood is sawn in different ways. The two most popular ways to saw and cut a plank of wood are plain and quarter sawing. Plainsawn wood is cut tangentially to the raw lumber whereas quartersawn is cut radially.
Illustrated below, the two methods can make the same sample of wood look very different.
A – Quartersawn (notice the lateral graining) B – Plainsawn (notice the rings and running lines).
Knowing how to spot the difference will prevent misidentification.
As has been made clear, visual identification only goes so far with hardwood. There are two other big elements that should help you narrow your wood sample down to a possible list of final contenders.
The rule of thumb is that harder hardwoods (like Oak and Mahogany) will be heavier and more dense than softer hardwoods (like Pine). You can calculate the volume of your sample by measuring it’s height/width/depth in centimeters and multiplying them. Next, place your sample on a kitchen scale. Measure in grams and place the grams over the volume.
You should wind up with a number like 9.575g / 25 cc (cubic centimeters). If you divide this, you will find you get the number .383 g / 1 cc or .383 g/cc.
Next you can reference this handy chart and try and find the closest match. In this case, it’s buckeye yellow that comes in at .383 g/cc. Buckeye is not a common flooring material and a quick Google search confirms it looks nothing like my sample, so I would keep trying to find close numbers and letting their physical appearance confirm or deny our hypotheses.
Finally testing the hardness by trying to scratch the sample with various items should prove whether or not the wood is a hardwood or a softwood (softwood will scratch easily with less hard items like glass or aluminum, hardwood will take harder metals like iron to scratch).
Again using this data, you can reference a chart like the Janka Hardwood Test to help narrow down your guess based on the physical appearance.
It is actually a lot of science. It takes a pretty scientific approach to identify a species of wood out of the entire beautiful and diverse spectrum. If science and algebra aren’t strong suits for you (and believe me, you’re not alone). You can always contact us at Signature Custom Flooring for more information and an experienced investigation!
“Aaron from Signature Custom Flooring did a breath taking job on putting Ash hardwood floors in our kitchen and dining room and 2 hallways. We would highly recommend Aaron for any project one would have concerning hardwood flooring. He is truly Professional! What an amazing man to work with. We are overwhelmingly pleased! Thanks Signature Custom Flooring for a job well done!”
– Anna Stratton, Hartford
“After seeing the bad shape my floors were in I was doubtful they would ever look “amazing”, but Signature Custom Flooring did a fantastic job!!! I would absolutely recommend hiring Aaron. I’ll for sure recommend him to anyone that needs their floors done.”
– Robert Orde, Green Bay
“Aaron did a beautiful job on our floors. After 15 years, they were in need of refinishing. Aaron restored the original beauty of the maple floors and suggested a water-based finish instead of the oil-based. No more gold floors!!! We also appreciate that there was virtually no dust to clean up. Great job Aaron. Thank you for making our floors beautiful again.”
– Lisa Paul, Oshkosh
“Aaron is an incredibly hard worker with incredible expertise on hardwood flooring. I had NO idea the amount of information out there on species of wood, finishes, etc. and Aaron was so helpful in explaining it all and making sure we got the floor we really had cooked up in our imagination. We could not be happier! The price was great, the service was fantastic and we got exactly what we wanted. I would recommend Aaron to anyone!”
– Nicole Waltemath, Oshkosh
Have you ever noticed how changing the color of a room can drastically change the feel and appearance of that room. As a kid I remember when my mom told me that I could paint the color the wall in my room any color I wanted. I remember how exciting that was! It’s like that […]
Learn how to maintain and protect your hardwood floor, as well as how often it should be refinished.